Speedflow Unvented Glass Lined Tank 5, 10 and 15 litre (SF05K / SF10K / SF15K)
Available
Non è stato possibile caricare la disponibilità per il ritiro
Ideal for use in cloakrooms and kitchens in offices, shops, student accommodation and domestic premises which have been extended and there is no central hot water system nearby. One unit located under the kitchen sink is often used to supply hot water for light dish washing in the kitchen sink and hand washing in the cloakroom basin.
- Supplies hot water for up to three basins (varies by model)
- Installation: Site above or below the sink, but inlet and outlet must be at the top. Floor-standing or wall-mounted
- 2.0kW element power rating - Energy Class: B
- Neon element on indicator
- External temperature control with frost protection setting and overheat temperature protection
- Glass lined steel tank as standard
- Can be used with regular taps including mixers
- Mains pressure flow rates
- Outer Casing: Easy clean, high impact plastic
- Water Pressure: Min 0.5 bar - Max 4.2 bar
- Water Connection: Inlet / Outlet 2 x 1/2" BSP male (100mm apart centre to centre). Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter
- Product Approvals: CE, UKCA, WRAS
- Warranty: 2 year parts or replacement
- Element type: Stainless steel flange type
- Thermostat: Bulb type adj. to 75°C. E setting approx. 50°C
- Insulation: High density polyurethane foam
- Not suitable for hair wash basins in hairdressing salons
- Cable pre-wired (1.5m)
- IPX4
Descrizione
Descrizione
The Speedflow is a compact unvented water heater designed to provide convenient hot water where a central hot water supply is unavailable or impractical. It can supply multiple outlets for everyday applications such as handwashing and light dish washing. Typically installed discreetly beneath a kitchen sink, the Speedflow provides reliable mains pressure hot water in a choice of 5, 10 and 15 litre capacities to suit different requirements.
Selection guide (approximate depending on usage):
- 1 basin: 5L (SF05K)
- 1 - 2 basins: 10L (SF10K)
- 2 - 3 basins: 15L (SF15K)
Dimensions & weight
- 5L: W280mm x D245mm x H320mm - 5.5Kg empty; 10.5Kg full
- 10L: W310mm x D280mm x H410mm - 6.8Kg empty; 16.8Kg full
- 15L: W310mm x D280mm x H530mm - 8.3Kg empty; 23.3Kg full
Heat up time
- 5L: 6 mins
- 10L: 12 mins
- 15L: 18 mins
Minimum theoretical heat up time for 70% tank capacity from 10°C to 60°C
Safety
- Overheat temperature protection (manual reset)
- Supplied pressure relief valve must be fitted in every case (set at 6 bar)
- Frost protection if power on.
- Optional thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.
Anode is replaceable grey magnesium (inspect at least annually or more regularly in scale/aggressive water conditions).
Accessories may be needed to comply with the Water Regulations. Pressure reducing valve required for pressures above 4.2 bar and expansion vessel and check valve required if cold water draw off nearby. Kits available separately (please contact us). Flow Through Kits are available separately (please contact us).





