Rho IN44T Instantaneous Inline Thermostatic Water Heater 4.4kW
Available
Non è stato possibile caricare la disponibilità per il ritiro
4.4kW instantaneous water heater designed to provide energy efficient hot water. Compact, space-saving design makes it ideal for washrooms and other point-of-use applications where a local hot water supply is required. Thermostatic model provides precise electronic temperature control for improved efficiency. Please check the flow rate and temperature performance data in the downloads section below to ensure the Rho is suitable for your application.
- Energy Class: A
- Supplies hot water to a single outlet for hand washing at a single basin
- Heats the water instantly as it flows through the unit
- Blue LED temperature display
- External electronic thermostatic control accurate to the nearest degree
- Heating power adjusted electronically to compensate for temperature, flow rate and water pressure variations
- Energy efficient - no standing heat losses and only uses the power required to deliver the chosen temperature
- After power off/on the unit will recall the last usage outlet temperature
- Outer casing: Easy clean high impact ABS
- Flow rate: Min 2.5 lpm
- Water pressure: Min 1 bar
- Maximum rated pressure: 7.5 bar
- Water connection: Inlet/outlet 2 x 1/2" BSP male (40mm apart centre to centre). Fittings required (not supplied): 2 x 15mm compression to 1/2" BSP female adapter
- Dimensions: W190mm x D80mm x H140mm
- Product Approvals: CE, UKCA, WRAS
- Warranty: 2 year parts or replacement warranty
- Element type: Bare wire heating system (three nickel chrome heating elements)
- IP Rating: IPX4
- Overheat temperature protection: 80°C
- Water resistivity: ≥ 1300 Ωcm
- Empty product weight: 1.6kg
Descrizione
Descrizione
The Rho is a compact instantaneous inline water heater designed to provide energy efficient hot water on demand for handwashing at a single basin. Available in 4.4kW and 6.0kW models, with thermostatic and non-thermostatic options, the Rho heats water instantly as it flows through the unit, eliminating standing heat losses.
Its compact, space-saving design makes it ideal for washrooms and other point-of-use applications where a local hot water supply is required. Thermostatic models provide precise electronic temperature control for improved efficiency. Please check the flow rate and temperature performance data to ensure the Rho is suitable for your application see downloads section.
Controls
- Temperature display (°C)
- Power on/off button
- +/- controls allow the user to set the required temperature
- The temperature display will flash if the set temperature cannot be reached
Application
Recommended temperature for hand washing or shower 38°C
Recommended temperature for a kitchen sink 50°C
Rho Instantaneous Water Heaters are intended for use with spray head taps with removable M22/M24 nozzles. The supplied tap spray nozzle must be fitted in the tap to control the water flow rate and to provide best performance and energy and water efficiency. Not suitable for use with thermostatic mixing valves or taps or to supply a single lever mixer tap. Temperature factory set at 38°C and can be adjusted by the user between 30°C and 48°C. This thermostatic model only is suitable for use with preheated water e.g. solar heating systems subject to maximum inlet water temperature 48°C.
Installation
This appliance must be installed in a frost free environment. The heater should be located as close as is practicable to the hot water outlet to avoid unnecessary heat losses through the pipework. Cable pre-wired (0.7m).
Selection Guide
Take into account that the incoming water supply temperature will be lower in the winter than summer.
The incoming water temperature can fluctuate dependent on time of year in the UK. Winter may result in incoming temperatures below 10°C, whereas summer water temperatures can be upwards of 15°C. It is imperative this is taken into account.
For example the heater could deliver 42°C water in the summer (with an incoming water supply temperature of 15°C). The same product with the same flow rate would only be able to deliver 37°C in winter (due to a lower incoming water temperature of 10°C). The delivered temperature will be even lower if the incoming water supply temperature is less than 10°C.
Check the flow rate and water temperature will be adequate for your application using the chart and tables provided below in the downloads section.

