Our expert says: "The Slimforce DFLIF02 may be small in stature but it certainly packs a punch whilst being very energy-efficient, more so than some other popular units on the market. Our in-house test showed it did take 6 secs longer to dry than the popular Dyson V but 3 seconds quicker than the Warner Howard Airforce. So, if you have a low traffic location (less than 100 uses a day) that needs a good performing, minimal running cost, very slim and compact unit, then this comes at a very competitive price. These are perfect for secondary schools, small offices, restaurants, cafes and bars/pubs. It's not the quietest but by no means one of the loudest, just a consideration if you have paper-thin walls, it’s for a library or your facilities are for very young children. One of the easiest to install also."
The Dryflow® Slimforce is an attractive and compact automatic hand dryer with a narrow 10cm trajectory, making it ADA compliant and ideal when space is limited. The product is recommended for locations that will receive a maximum of 100 uses a day, which would typically make them suitable for most schools or workplace environments but not regularly/heavily used public washrooms.
A concentrated airflow delivers fast dry times, similar to those of other popular models on the market. Fully dried hands each and every time, it satisfies all expectations with no user leaving disappointed.
This unit runs at just 1kW with the heating element activated, so it is much more energy efficient than traditional models which have a rated power from 2 to 2.5kW with much slower dry times. You can also switch the heater element off via an internal on / off swtich, allowing this to run at just 0.6kW rated power.
The working components are protected from water and dust to a high level (IP23) giving the product extra durability.
A one-piece weld free cover, fixed by 2 vandal proof screws make it suitable for environments which may be prone to misuse. A filter is included to clean the air taken into the dryer of particles. Its noise levels are similar to hand dryers on the market of the same price range.
Solid one-piece AISI 304 stainless steel cover with anti-vandal screws available in a brushed satin finish. Rated power of between 600W - 1000W (internal on/off heater switch). A universal brush motor rotates at 30,000 rpm, producing a 223MPH airspeed concentrated through a round outlet. The manufacturer dry times are stated as being around 12 seconds. A blue LED light shines on the hands during activation to guide the user to the airflow.
RIBA Architect classification N13-472 hand driers/hand dryers
Here at Intelligent Hand Dryers UK we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email firstname.lastname@example.org
We offer a 28-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||100 (Low Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||800 hours|
|Motor Speed||30,000 RPM|
|Air Speed||224 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||0.6 - 1 kW|
|Energy Per Dry||2 - 2.78 Wh|
|Heater Element Power||0.4 kW|
|As Standard||1 Year|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Cover Material||Stainless steel|
|Notable Extras||Filter, Blue LED light, 10cm depth|
|Net Weight||2.5 Kg|
|Packaging Height||- mm|
|Packaging Width||- mm|
|Packaging Depth||- mm|
|Packed Weight||- Kg|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.