Our expert says: "A robust hand dryer that has it all. Not least an installation process that makes installers and end users lives so much easier. One of the fastest drying in the world, our in-house testing showed a dry time that matched the Dyson V HU02 on maximum settings. The easily customisable G-Force MKII GFM201, GFM202, GFM203 and GFM204 were 9 seconds faster than the Warner Howard Airforce and only 2 seconds slower than it when running at just 420W (low energy setting)!
Cutting-edge installation process
A plug-in system hand dryer, making it so easy to securely attach and detach the unit from the wall. Ideal for allowing trades access at any time during a fit-out. Also, should a fault occur, no need to pay and wait for someone to disconnect from the power supply. You have access to safely remove and replace the hand dryer 24 hours a day, 7 days a week. Read more about the benefits of this type of installation process here
Incredible dry times
People want the fastest dry time possible. Every user will leave the washroom with fully dried hands using the G-Force MKII GFM201, GFM202, GFM203 and GFM204, in a time faster than anything they believed was possible.
Low carbon footprint and energy use
You can run this at just 420W and still provide dry times that will satisfy all user expectations. You will spend hardly anything running this unit on any setting. The environment benefits from very low carbon production when compared to other forms of hand drying such as paper towels.
*Carbon Neutral Hand Dryer
Together with ClimatePartner (www.climatepartner.com), Dryflow has measured the carbon emissions that occur during the manufacture through raw materials, packaging, logistics and disposal: this is known as the Product Carbon Footprint. They have then, where possible, avoided and reduced their CO2 emissions. They've also offset all unavoidable CO2 emissions with climate-friendly projects and alternatives. As a result of this, the selected products are certified carbon neutral, meaning you are making immediate carbon savings.
As stated by ClimatePartner, anyone who buys carbon neutral products is making a concrete contribution to fighting global warming and this is an easy way to take climate action with a considered purchasing decision.
Robust, vandal-resistant yet improves washroom environments
This is a unit made for places where misuse could occur, keeping your hand dryers in service. It is highly vandal resistant with a thick steel cover and plastic parts made of PA6V0, which is known for its high mechanical strength and good flame resistant properties. The long-life motor is protected by a cover made from thick stainless steel. The reduced sound airflow is complemented by the absorption of noisy wall vibrations via rubber blocks on the base. Odour neutraliser’s can be purchased to help rid the bathroom of unwanted smells.
Adjustability at your fingertips
Personalise the unit to match any location and ongoing budget constraints. The speed of motor can be reduced to lower noise levels further. The heater element can be switched off via an internal switch, additionally reducing energy bills.
^Based on £0.20 per kWh. ^^Based on average 143 paper towels per £1 spent, using 1 paper towel per dry.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||300+ (High Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||3,000 hours|
|Motor Speed||30,000 RPM|
|Air Speed||202 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||0.42 - 1.5 kW|
|Energy Per Dry||1.75 - 4.17 Wh|
|Heater Element Power||0.4 kW|
|As Standard||5 Years|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Finishes Available||White, Black, Brushed, Polished|
|Cover Material||Stainless Steel (White Epoxy)|
|Notable Extras||Plug in system installation|
|Net Weight||5.1 Kg|
|Packaging Height||390 mm|
|Packaging Width||290 mm|
|Packaging Depth||250 mm|
|Packed Weight||5.8 Kg|
|Certificates||CE, CUL, UL, TUV-GS, Greenspec|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.