Our expert says: “For high traffic locations that need rapid, energy-efficient, yet low noise drying. A stylish, elegant unit, the D-Flow Eco DF01W, DF01G and DF01B enhances the appearance of many washrooms. It has settings to customise noise and energy levels to unique requirements. Our in-house testing showed dry times just 1 second slower than the Mitsubishi Slim and Dyson AB14 on maximum settings and it carries the same advantage of a water collection system to keep walls and floors dry as the Slim. Even at its lowest setting of 420W its dry time was 1 second faster than the popular Warner Howard Airforce which you may have used, for comparison. Although this unit has a brushed motor, it is significantly long-lasting and perfect for locations like large offices, cinema/theatres, schools & higher education, hotels, shopping malls, airports, restaurants, public attractions and factories with an easy installation to boot” Read our full review here
Contemporary, stylish and high performing
Designed and built in Europe, this unit’s curvaceous front gives an air of elegance in the most sophisticated of washrooms. Although easy on the eye, it is still a powerhouse in the drying stakes. It provides one of the fastest dry times you will find on the market. Not only does it look great, users will be blown away by how fast it dries their hands.
Superior water collection system
There’s nothing worse than having to constantly dry the floors when excess water drips down the side of this type of hand dryer. Water is driven into a hidden, easy to empty collection tray. The collection tray can be emptied via an external valve, minimising the need to remove parts. To take this a step further, a waste pipe kit can be purchased and fitted so that discarded water is eliminated automatically without any further intervention.
Advanced hygienic properties
Washroom cleanliness is essential. A high grade HEPA filter purifies the air taken into the hand dryer of microbes, pollen, dust mites and fungi. Nothing but clean air is blasted over the hands. The HEPA filter has a carbon filtering medium that neutralises odours and absorbs fumes and gases, getting rid of bad smells. Odour neutraliser’s can be purchased to further help rid the bathroom of unwanted aromas. The ABS is injected with Biocote® antimicrobial and antibacterial protection technology based on silver ions. These ions inhibit the reproduction of germs in drying areas throughout its lifetime.
Low carbon footprint and energy use
You can run this at just 420W and still provide dry times that will satisfy all user expectations. You will spend hardly anything running this unit on any setting. The environment benefits from very low carbon production when compared to other forms of hand drying such as paper towels.
Adjustability at your fingertips
Personalise the unit to match any location and ongoing budget constraints. The speed of motor can be reduced to lower noise levels further. The heater element can be switched off via an internal switch, additionally reducing energy bills.
Quick and easy maintenance
If a rare fault should occur or general maintenance is required, you are quickly notified via different coloured LED’s and warning alarms. You’ll get it back in service at no time at all.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||300+ (High Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||3,000 hours|
|Motor Speed||32,000 RPM|
|Air Speed||260 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||0.42 - 1.5 kW|
|Energy Per Dry||1.75 - 4.17 Wh|
|Heater Element Power||0.4 kW|
|As Standard||3 Years|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Finishes Available||White, Silver, Black|
|Notable Extras||Water collection system|
|Net Weight||8.3 Kg|
|Packaging Height||750 mm|
|Packaging Width||600 mm|
|Packaging Depth||500 mm|
|Packed Weight||10.3 Kg|
|Certificates||CE, CB, EMC, EAC, GS, UL, ROHS, G-Mark, Building Green|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.