The Dryflow Tri-Tap wash and dry series is an over the sink wall mounted hand dryer tap, WRAS approved sensor tap water faucet and automatic soap dispenser faucet suitable for high traffic locations. An elegant, touch free and hygienic washroom solution, this works efficiently as a complete system or as individual products bought separately.
This set has been designed to avoid water splashing on the floor, to save space and to reduce the amount of time spent by individuals in the washroom.
This wall mounted option is ideal for new construction projects of public restrooms which allow for the working components to be boxed in or for stud walls.
The Dryflow Tri-Tap wash and dry series is eco-friendly, saving more than 73% in terms of economical savings vs. similar solutions on the market. Optional hygienic extras include a HEPA media filter, “Ion Hygienic” technology and an air-freshener tablet.
This is the FULL SET Dryflow Tri-Tap wash and dry series. Please see the downloads tab below for more information about the individual products. You can also purchase individual products.
This product is available in a DECK mounted Bi-Tap or WALL mounted Tri-Tap option.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email firstname.lastname@example.org
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.
If stated on our website under the product “suitable for outdoor use” then yes.
Warranty typically starts from dispatch date of dispenser and last 6 months. Some dispensers may vary.
Is this an automatic unit and there is no power? The batteries may be flat and require replacing. If you have more than one unit, you will be able to test this by taking the batteries from a working unit and fitting them into the unit without power.
If the unit is not pumping out gel, remove the gel from unit, clean the holding tank and flush warm water through the pump.
If the tips above have not resolved the issue, give us a call and we’ll be happy to help.
If users are aggressive with the product or if it’s damaged by impact, this is not covered under the warranty. Unfortunately, we would not be able to replace. However, we do want to help. Please call and we can do our best to give you some options to help your situation.