The touch Free system of the Dolphin DB100/DB125 Series tap will allow water to flow when hands are detected by the infrared sensor, so water waste significantly decreases in high traffic locations. This infrared sensor tap by Dolphin has an elegant and unique design, ideal for high finish locations. The tap is limited to 70°C. DB100C-STL / DB100S-STL-2 will operate using a 9 volt battery that will provide a warning when power is low. DB125C-STL /DB125S-STL-2 will operate using a plug in 9 volt transformer. For anymore specific specifications/requirements, please refer to the Spec Sheet and/or Install and User Manual.
Hygiene flush feature runs the tap for 25 seconds, 24 hours after the last use of the tap. This flush time or 24 hours interval cannot be changed and is not based on real time, the feature can only be switched on or off using a compatible remote control (DB51). Taps are supplied with this feature switched on.
Dimensions: 172 Height , 50 Diameter , 91 Projection (mm)
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here