We have written a blogpost about it. Please, click here.
As we gathered in this blog post, we consider that a commercial hair dryer is a plus at leisure centres and accommodations.
- Blow drying can be actually more beneficial than natural drying, as long as it has been set at a safe temperature, approx. 15 cm away from hair.
- Users appreciate control over their hair style.
- More convenience increases good reputation of the facilities.
- Staff would receive fewer enquiries about hair dryers.
- Not transporting so many hair dryers favours the environment.
First of all, you should know the type of commercial facilities where the hair dryer will be installed and the estimated amount of users. Once you have that information, you could consider some concepts like those we gathered in this blog post.
To help to choose the most suitable commercial hair dryer for every case, we have created a comparison table for these two products.
We have gathered all we know about hair dryer installation in this blog post. Anyway, we encourage you to read and follow what's instructed on the manual that the product includes.
We advertise the colours as marketed by our suppliers. However, we must note that what we observe might change depending on the colour shade (warm or blue) and the surroundings. For example, the Hotello range of hair dryers are a warm white, if they are installed on blue white tiles, the hair dryer surface may look cream.
|Energy Consumption||Electrical Supply Voltage||220-240 Volts|
|Electrical Supply Frequency||50-60 Hz|
|Performance||Motor Speed (max setting)||19,000 RPM|
|Motor Speed (min setting)||14,000 RPM|
|Air Speed (max setting)||127 MPH|
|Air Speed (min setting)||87 MPH|
|Operating Temperature Range||45 °C|
|Heater Element Power||600 Watts|
|Motor Cutoff Time||60 Seconds|
|Rated Power||Rated Power (max settings)||1,000 Watts|
|Rated Power (min settings)||200 Watts|
|Noise||Operating Sound Level (max setting)||73 dB|
|Operating Sound Level (min setting)||65 dB|
|Sound Level Notes||According to UNE EN ISO 11201:2010 V2 standard dB|
|Construction||Materials||304 stainless steel, PA6V0, polyurethane, PBT, ABS|
|Net Weight||5.6 kg|
|Finishes||Brushed Stainless Steel|
|Electrical & Safety||IP rating||IP23|
|Dimensions||Product Height||330 mm|
|Product Width||265 mm|
|Product Depth||170 mm|
|Mounting Instructions||Men||1500 mm|
Here is a list of spares and accessories available for the Machflow Hair Dryer.
If you do not see the specific part you are looking for, please contact us.
|Spare Part or Accessory||Part Code||Link to Product|
|Machflow Hair Dryer Plug-in System||KTP009||Please click here|
|Machflow Hair Dryer White Painted Stainless Steel Cover (nr. 1 on drawing below)||RC9224009SMD|
|Machflow Hair Dryer Brushed Stainless Steel Cover (1)||RC9212009SMD|
|Machflow Hair Dryer Hose & Handle (2)||RC9331009SMD||Please click here|
|Machflow Hair Dryer Motor (3)||RC9111003SMD|
|Machflow Hair Dryer Heating Element (4)||RC9141010SMD|
|Machflow Hair Dryer Electronic Control Unit (5)||RC9121016SMD|
You can see below a technical drawing of the spare parts above.