Dyson Airblade Tap Wall AB11

Home
Sensor Taps
Dyson Airblade Tap (Wall)

Suitable for up to 500 plus uses per day

Dry time (manufacturer stated): 12 Seconds
Cost per 1000 dries: 64p (95.7% saving against paper towels)
Guarantee: 5 Years
Rated Power: 1.6 kW | 5.33 Wh per dry
A hand washing and drying experience all in the one place - no water on the floors
Easily switches from water to air
430 mph sheets of air that scrape water from hands
HEPA filtered air

Quantity

Finish

£1,100.00

£1,320.00 inc. VAT

In Stock
Est. delivery 3-5 days
5 Year
Guarantee

Add to a wishlist.Book a Demo

Performance Rating

Energy Consumption
This rating is based on the watt hours per dry of the hand dryer which is derived from the rated power and the time taken to dry the hands. We have used the figures based on either the manufacturer’s dry time, if yet to be in house tested or based on the in house testing dry time we have conducted. This will also be based on the most energy efficient setting, if the hand dryer is adjustable for speed and/or heat.
Watt hours per dry:
- 0 – 1.99Wh = star rating 5
- 2 – 2.99Wh = star rating 4.5
- 3 – 3.99Wh = star rating 4
- 4 – 4.99Wh = star rating 3.5
- 5 – 5.99Wh = star rating 3
- 6 – 6.99Wh = star rating 2.5
- 7 – 7.99Wh = star rating 2
- 8 – 8.99Wh = star rating 1.5
- 9 – 9.99Wh = star rating 1
- 10Wh and above = star rating 0.5
3.0 out of 5
Quiet Sound Level
This rating is based on the manufacturers stated sound level, usually at 1m. Please see the section titled "how quiet is the." for more information and independent test results, which give a more accurate noise decibel level. These ratings will also be based on the low noise setting, if the hand dryer is adjustable for speed. Therefore at full speed the hand dryer may not be quiet, however it may be adjustable to become quiet if this is required.
Decibels (dB):
- Up to 68dB = star rating 5
- 69 – 70dB = star rating 4.5
- 71 – 72dB = star rating 4
- 73 – 74dB = star rating 3.5
- 75 – 76dB = star rating 3
- 77 – 78dB = star rating 2.5
- 79 – 80dB = star rating 2
- 81 – 82dB = star rating 1.5
- 83 – 84dB = star rating 1
0.5 out of 5
Life Expectancy
This rating is based on the number of motor life cycles (number of uses) the hand dryer, in theory, will last for. This is based on the motor life expectancy given to us in hours, from the manufacturer.
The number of cycles (uses) has been calculated as follows:
(Number of seconds in the hour / seconds per dry) x motor life hours
For a more individualised longevity calculation based on your own usage numbers please use the life expectancy calculator on each product page.
Number of motor life cycles:
- 1,000,000 and over = star rating 5
- 800,000 – 999,999 = star rating 4.5
- 600,000 – 799,999 = star rating 4
- 400,000 – 599,999 = star rating 3.5
- 200,000 – 399,999 = star rating 3
- 100,000 – 199,999 = star rating 2.5
- 80,000 – 99,999 = star rating 2
- 60,000 – 79,999 = star rating 1.5
- 40,000 – 59,999 = star rating 1
- 39,999 and under = star rating 0.5
3.5 out of 5

High Speed
These ratings are based on the in house testing we have conducted regarding dry times. They show realistic comparisons of what to expect from each hand dryer. Please note that the manufacturer stated dry time is not always accurate when compared to the hand dryer being used in realistic conditions. The ratings are based on the hand dryer being placed at its high speed setting if it can be manually adjusted.
Dry Speed (seconds):
- 10 – 11 seconds = star rating 5
- 12 – 13 seconds = star rating 4.5
- 14 – 15 seconds = star rating 4
- 16 – 17 seconds = star rating 3.5
- 18 – 19 seconds = star rating 3
- 20 – 21 seconds = star rating 2.5
- 22 – 23 seconds = star rating 2
- 24 – 25 seconds = star rating 1.5
- 26 – 27 seconds = star rating 1
- Over 28 seconds = star rating 0.5
4.5 out of 5
Enhanced Hygiene
Hand dryers are a hygienic method of drying the hands. The better the dry, the less the risk of carrying germs on wet hands. Some hand dryers however have gone that little bit further to enhance the hygienic aspects of the hand dryer. These ratings are based on these extra factors that have been added to aid the hygienic properties. These ratings are based on an added together scoring system where the higher the rating the more enhanced the hygienic properties of the hand dryer. Cold Plasma Clean (CPC) is the most advanced hygienic property on the market and scores a maximum of 5 stars.
Enhanced Hygienic properties:
- Cold Plasm Clean Technology = score 5
- Fast dry (<15secs) = score 0.5
- Touch Free = score 0.5
- Heat Sanitation = score 0.5
- UV-C cleaning = score 0.5
- HEPA filter = score 1.5
- Anti Bacterial Coating = score 0.5
- General filter = score 0.5
- Ioniser = score 0.5
3.0 out of 5
Vandal Resistance
Some hand dryers would not be suitable for some locations where abuse may be likely such as a train station or night club. However the same hand dryer would be suitable for an office or school location. These ratings are based on an added together scoring system where the higher the rating, the more suitable we would recommend for areas where abuse may be likely.
Vandal Resistance score
- Compact size = score 0.5
- Decreased blockage potential = score 0.5
- Additional Backplate/ fixings strength = score 1
- Anti-vandal extras = score 1
- Metal / ABS = score 1
- Cover thickness 1.5mm or more = score 0.5
- No leverage points (design) = score 0.5
3.5 out of 5

Calculate dryer life expectancy

Calculate dryer costs

Description

This first generation has now been discontinued and replaced by the improved Dyson Airblade Wash+Dry WD06. Click here to be taken to this product.

Built with the same airblade technology as the original Dyson Airblade AB14 and the Dyson V, the Dyson Tap dries the hands in a super-fast 12 seconds. All whilst not having to leave the sink area. Using intelligent infrared sensors and computer circuitry, the tap initiates water and hand drying at the appropriate times.

The Dyson Tap includes the world’s smallest fully integrated digital 1600W motor and a HEPA filter for hygienically filtered air. Testing based on NSF Protocol P335 shows that the Dyson Airblade Tap hand dryer is fast. Every second, up to 35 litres of air is forced through apertures measuring just 0.8 mm wide. The result – 430 mph sheets of air that scrape water from hands, drying them quickly and hygienically.

The main advantage of the Tap is the fact that water stays over the sink and therefore improves the health and safety associated with a wet floor. It also reduces the amount of time needed to remove water from the floor areas by the facilities team. This also reduces the amount of space needed in the washroom as there is no need for 2 separate wash and dry areas.

There are 3 models of the Dyson Airblade Tap. This is the AB11 Wall version, there is also a AB10 Long and AB09 Short version. Each one is recommended for different sink types. Please see our resources section at the bottom of the page by clicking here to see Dysons recommendations and approved sinks.

Please note the water pressure between needs to be 1-8 bar, with pipe thread 1/2” BSP. The minimum clearance distance is 100mm between floor and motor bucket. The AB11 must use metal enclosure as supplied.

Like the idea of 'water free' floors but already have high quality taps? You may wish to consider a retrofit, 'over the sink hand dryer' such as the Dryflow Dri-tap.

RIBA Architect classification N13-472 hand driers/hand dryers

...Read more less

Applications:Heavy use (301 to 500 uses per day)

National BIM Library Object

Key Features
Downloads
Specification

Dry time (manufacturer stated): 12 Seconds
Cost per 1000 dries: 64p (95.7% saving against paper towels)
Guarantee: 5 Years
Rated Power: 1.6 kW | 5.33 Wh per dry
A hand washing and drying experience all in the one place - no water on the floors
Easily switches from water to air
430 mph sheets of air that scrape water from hands
HEPA filtered air
Touch free operation
No heater element
Three models available - AB09 short version, AB10 Long version and AB11 wall version
IP35

Dyson Airblade Tap Sink Recommendations (PDF)

Dyson Airblade Tap User Manual (PDF)

Dyson Airblade Tap Technical Information (PDF)

Dyson Airblade Tap Pre Install information (PDF)

Dyson Airblade Tap Install Manual (PDF)

Dyson Airblade Tap Cleaning Guide (PDF)

Dyson Airblade Tap Brochure (PDF)

Energy Consumption	Electrical Supply Voltage	220-253 Volts
	Electrical Supply Frequency	50 Hz
	Standby Power Consumption	<0.5 Watts
Performance	Expected Motor Life	1500 Hours
	Dry Time (max setting)	12 Seconds
	Dry Time Notes	As yet not independently tested to verify
	Digital Brushless Motor
	Motor Speed (max setting)	90000 RPM
	Air Speed (max setting)	430 MPH
	Air Volume (max setting)	63.57 CFM
	Operating Temperature Range	40 °C
	Motor Cutoff Time	30 Seconds
Rated Power	Rated Power (max settings)	1600 Watts
Rated Power	Energy Per Dry (max setting)	5.33 Watt-hours (Wh)
Noise	Operating Sound Level (max setting)	85 dB
Noise	Sound Level Notes	As yet not independently tested to verify dB
Guarantee	5 Years
Construction	Materials	Stainless Steel
	Net Weight	9 kg
	Packed Weight	11.4 kg
Finishes	Brushed Stainless Steel
Electrical & Safety	IP rating	IP35
Dimensions	Product Width	297 mm
	Product Depth	312 mm
	Packaging Height	302 mm
	Packaging Width	610 mm
	Packaging Depth	375 mm
Certification	CE
Replaceable Features	HEPA Filter
General	General Notes	RIBA Architect classification N13-472 hand driers/hand dryers Type: high velocity air dryer and tap Manufacturer: Dyson Product reference: Airblade Tap AB11 Operation: automatically activated Power rating: 1600W Enclosure: Stainless steel Colour: Brushed Satin Fixing arrangement: Wall mounted with rear entry cabling Electrical supply: Fused spur.