• 0.8L or 1.6L capacity cartridges | 0.8ml per shot dispensed | 1000 or 2000 shots per cartridge
  • Dimensions: 50 (W) x 105 (H) x 135 (D) mm
  • Mounting hole: Ø 25mm
  • Sensing delay time: 2 seconds
  • Material: plastic
  • Battery required: 4 units of alkaline type-D
  • Batteries average performance: 100 refills or 2 years
  • Optional 6V transformer: Part No. 826-20
  • Guarantee: 1 year
  • Spacer, four batteries and 800ml soap cartridge refill are provided
Polished (with batteries and soap cartridge)
Polished
£109.95
£131.94 inc. VAT

Bulk Prices From

£102.95

  • In Stock
  • Est. delivery 2-3 days
  • 1 Year
    Guarantee

Description

This starter kit includes the OneShot® automatic soap dispenser, one 800ml soap refill cartridge (1,000 hand washes) and a pack of 4 alkaline type-D batteries that are expected to last for 2 years (or 100 refills). The sensor has a range of 100mm and a reaction time of approximately 2 seconds after the users placed their hand. The mechanism will release 0.8ml of antibacterial or lotion hand soap. LED indicators will show low battery life (yellow) or low soap level (red). Instead of refilling the content manually, this aumatic soap dispenser requires soap refill cartridges (like the one provided in the package) that include the translucent soap bottle, as well as new supply tube and pump.

The OneShot® system is also compatible with 1600ml containers (2,000 hand washes), but consider, please, that a switch must be moved (from 1K to 2K) in order to adjust the motor assembly. Likewise, remember to press the refill reset button, so that the counter and LED can work properly.

The spout, shank or cartridge are made of plastic, which will resist corrosion. On the other side, the motor and battery pack components are water resistant. We recommend to read carefully the maintenance tips below. Regarding the cleaning of the chrome-plated cover, avoid abrasive solutions.

This unit requires the following conditions:

  • 25mm diameter hole in the basin or adjacent countertop.
  • Up to 50mm mounting thickness for the shank.
  • Clearance diameter of the container and motor housing: 125mm for the 800ml cartridge and 140mm for the 1600ml one.
  • Clearance below the counter: 295mm for the 800ml bottle and 345mm for the 1600ml one.

In case you prefer the same automatic soap dispenser without the batteries and the soap cartridge, you may take a look at product B-826. Both models include a plastic spacer, since the sink rim may be higher than 19mm and interfere with the sensor.

...Read more less

Applications:Adapted toilets for disabled, Public Toilet, Wash basin


Regarding soap dispensers in accessible toilets, what do English regulations recommend?

Approved Document M mentions two matters that would affect soap dispensers: contrast and location.

1) Bathroom fittings must have enough contrast among them and with the floor or walls, so that people with visual impairments or other conditions (dementia) can distinguish them.

Every surface has a LRV (light reflectance value) score. The difference between two finishes should be at least 30 points according to Document M. For example, white (85) can be combined with brushed stainless steel (45), but not with beige (70).

2) Several drawings illustrate in Document M how the toilet appliances and accessories have to be placed and at what distances. Diagram number 19 describes a unisex wheelchair-accessible toilet with a corner WC. As you can see, the soap dispenser (SD) is located above the washbasin, at 800-1000mm from the floor.

DocM diagram 19 about the fittings in a unisex wheelchair-accessible toilet with corner WC

For what these regulations say about taps, we can also conclude that soap dispensers should be easily operated by all type of users.

This information has been shared following the Open Government License v3.0 of Document M. 

Please, note that our interpretation could have mistakes. For further details about this, please, read the source text or consult a professional.

Which soap dispenser to choose in order to save costs?

We've gathered in this blogpost how to calculate the expenses and which factors bear in mind when choosing a soap dispenser.

Anything practical to know about infrared sensors?

The proximity sensors in our taps and some soap dispensers use active infrared technology: they detect the infrared radiation that a close object (in their range) reflects back. This means that hands, washroom accessories or just even dirt near them will activate them.

Furthermore, infrared sensors can misinterpret certain situations and open the solenoid valve when they are not suppose to:

  • Mirrors and very reflective finishes (like polished chrome) in front of them will send confusing signals if they are closer than 1.5 metre to the tap. One must be careful for example with the elements of the basin bowl: the spout of wall-mounted sensor taps should be at least 300mm away from the bottom of the sink and not facing a shiny basin plug. Tap sensors can also react if a person is wearing striking garments.
  • Other infrared sensors opposite them also imply unintended triggers.

Therefore, we encourage you to read the installation guidelines the manufacturer provides and accept that accidental unlocks are a (rare) fact.

Why to choose a counter mounted soap dispenser?

As we explain in this blog post, we think there are mainly three reasons to select vanity top soap dispensers over wall mounted.

  • A more accurate dispense, with little chance to missing soap shots and wasting the consumable.
  • A cleaner area that will be quicker to maintain.
  • Less wasted soap, which save costs for the facilities and the environment.
Guarantee1 Year
ConstructionMaterialsPlastic
Packed Weight2.68 kg
FinishesPolished Chrome
DimensionsProduct Height105 mm
Product Width50 mm
Product Depth135 mm
Print these specifications

Here is a list of spares and accessories available for Bobrick B-826 Soap Dispenser.

If you do not see the specific part you are looking for, please contact us.

Spare Part or AccessoryPart CodeLink to Product
Bobrick 6V AC Power Adaptor for B-826B-826.20Please click here