One of the smallest, impact resistant blade style hand dryers available, the Dryflow Vapordri produces some of the fastest dry times available. Just 11 seconds and the hands are completely dry using clean air pulled through a H14 HEPA filter! Such a low-cost unit to run, this suitable for high traffic hand dryer includes an intelligent heating system, only adding heat to the airflow if the washroom temperature drops below 25oC. The residual heat from the high-speed motor ensures the airflow is always a comfortable temperature in warmer washrooms. The modern design and futuristic LED lighting make this a very popular addition to the most contemporary of washrooms. Water is collected in an easy to service 0.5L collection tray to avoid wet floors
For added safety, if excess water is poured into the hand dryer due to misuse the unit is equipped to deposit the excess water outside the unit without damaging it.
The Vapordri has a smooth sound output and is engineered to minimalise noise transfer from one area to another. In practise the noise output is in the medium range for these types of hand dryers but certainly quiet considering the airspeed and dry times
With attractive blue LED lighting down the side of the unit and the air outlets lighting up when the hand dryer is in use (red or blue dependent on heater activation) this unit really does stand out in the washroom. A Large, long lasting H14 HEPA filter, capable of removing 99,5% microbes is easy to access and clean. Other enhanced hygienic properties include antibacterial ABS with the plastic injected with silver ions. This prevents the growth of bacteria, fungi and mould.
The Dryflow Vapordri is for when you are looking for a solid, long lasting blade style hand dryer that has it all. It takes up hardly any space, requires minimal servicing, looks amazing, includes enhanced hygienic features and is one of the fastest drying hand dryers in the world!
The universal brushed motor, suitable for high traffic locations with a life of 4200hours, produces a 335MPH (30,000 rpm) airspeed, creating in house tested 11 seconds’ dry times. Brush changes are necessary at 1400 hours intervals. In terms of drying cycles this is around 300,000-400,000 uses before the brushes need changing. The energy consumption of the motor is 1kW. The main heater element is 0.5kW. This gives a total rated power of 1.5Kw, however the unit will be working at 1kW in most locations as the main heater element only activates in washroom temperatures lower than 25oC. The casing is made of antibacterial ABS with the plastic injected with silver ions for enhanced hygiene. A H14 HEPA filter is included as standard and has been tested to remove > 99,5% microbes. The unit also has an 500ml drainage tank which collects the excess water from hand drying. Both the filter and drainage tank are easily accessible from the bottom of the dryer. The sound of the unit is a low 65.6db from 2M with results provided by the Technical University of Valencia. A luminous display system notifies of when the HEPA filter needs changing, when the water tray is full and when the brushes need changing. Sensor can be regulated to increase or decrease sensitivity.
Here at Intelligent Hand Dryers UK we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 28-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||300+ (High Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||4,200 hours|
|Motor Speed||30,000 RPM|
|Air Speed||335.5 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||1 - 1.5 kW|
|Energy Per Dry||3.06 - 4.58 Wh|
|Heater Element Power||0.5 kW|
|As Standard||5 Years|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Antibacterial Additives||Silver ions|
|Notable Extras||Water collection system|
|Net Weight||7.2 Kg|
|Packaging Height||605 mm|
|Packaging Width||380 mm|
|Packaging Depth||270 mm|
|Packed Weight||8.5 Kg|
|Certificates||CE, GS, SGS|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.