Our expert says: "One of our favourite dryers, they really do everything you want. Fast, low running costs, not too noisy and just so reliable. They are compact and modern. If you have the budget to buy quality, the Mitsubishi SMART won’t disappoint. Our in-house testing showed it can achieve a dry time 1 second faster than the Dyson V HU02 yet 10 seconds faster than the Warner Howard Airforce. Hygienic, customisable settings, very energy efficient and built to deliver quiet noise levels, some of the main reasons the University of Cambridge selected them for their Sidgwick site and the University of London for their library. The easy to install, high-traffic unit is perfect for schools, sports facilities, restaurants, shopping malls, large offices, café’s, bars and retail outlets." Read our full review here
One of the fastest drying hand dryers on the market, proven by our in-house testing, an 11 seconds dry time can be achieved. The unit also comes with a 5 year guarantee - we are the only company to offer this extended period (standard is 3 years). The Mitsubishi Jet Towel Smart has been designed on the principles of the very successful Jet Towel Blade “hands in” model, introducing a very compact “hands under” hand dryer, with a long-life motor. This has all the features you would expect from a Mitsubishi including quality build, high performance, energy efficiency and designed with the end user in mind including a sloped roof to stop people leaving things on the top of it. This hand dryer comes in a heated or unheated “lite” version. You are viewing the Mitsubishi Jet Towel Smart with heat available, which is available in a choice of 2 finishes, white or silver metal. The heat can be switched off to maximise energy efficiency at any time.
Not only is this hand dryer one of the fastest and most energy efficient it is also one of the quietest. Rated between 58 and 62dB this truly is one of the quietest high performing hand dryers on the market. This reduced noise is helped by having a near silent motor when in use, as well as aerodynamic design in the interior; there are no sharp edges inside where the air flows. We have yet to independently test these levels however.
Using between an extremely efficient 410 – 980W of power with a dry time range between 11 – 18 seconds the energy efficiency and performance of this hand dryer are excellent. It will cost on average approximately 25p – 36p per 1000 uses.
The NSF (National Sanitation Foundation) award has been achieved due to an antibacterial resin being used in the build materials, giving added hygienic properties. The intake grille – which has an enlarged width, rounded ends and centre rib added for reinforcement – is on the side of the hand dryer, which is designed to prevent dirty air and water from the hand drying cycle being sucked back into the hand dryer and recirculating. A filter is included to separate dust and particles from the air intake so cleaner air is blown onto the hands.
The unit is military tested to last above 700hrs continuous use. This test is above and beyond what other motors are tested to, (the highest industry test), other units would not last this long under the same testing protocol. We have to date zero failure rates.
This version has 4 settings. There is a high and standard speed setting, whilst being able to turn the heater element on or off. Each setting has its benefit for drying time, energy efficiency and sound level giving the user a choice based on their unique preferences. The sensor has been specifically designed to give a very quick response and at just 0.1 seconds, the user will not be left waiting for the activation to occur. The motor instantly hits full speed, this quickens the dry time so uses less energy. The nozzle has been made extra wide allowing for an increased airflow to cross both hands at the same time, improving the dry time superbly.
Optimal hand drying method
Mitsubishi have crafted the optimal way to dry your hands using the Jet Towel Smart. You will see this method used in the dry test videos in the section on the left hand side of this page.
The method includes placing the hands behind the airflow by going underneath the unit from the sides. You then bring the hands towards you so that the blades of air scrape the moisture away from you. This is repeated until the hands are dry, changing the hands to a palm up and palm down position throughout the dry time. This prevents splash back onto the user by driving moisture away from them. It also makes sure the water flow is going off the hands in one direction and not forced back onto the hands from a multi directional hand movement.
We have shown in the video section on the left hand side that this technique does provide the best drying experience when compared to a traditional way of rubbing the hands together and using a forwards/backwards motion through the blades of air.
RIBA Architect classification N13-472 hand driers/hand dryers
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email firstname.lastname@example.org
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||300+ (High Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||1,400 hours|
|Air Speed||353 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||0.41 - 0.98 kW|
|Energy Per Dry||1.94 - 2.72 Wh|
|Heater Element Power||0.25 kW|
|As Standard||5 Years|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Finishes Available||White, Silver|
|Cover Material||Steel cover, ABS body|
|Antibacterial Additives||Silver ions|
|Notable Extras||Filter, NSF Approved|
|Net Weight||4.5 Kg|
|Packaging Height||380 mm|
|Packaging Width||340 mm|
|Packaging Depth||200 mm|
|Packed Weight||- Kg|
|Certificates||CE, NSF Approved|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.