Our expert says: “When bathrooms have a contemporary décor but are restricted on space, the EcoWave DFEW01 and DFEW02 stand out as a low energy solution that packs in some great features. These low noise units look fantastic with their ripple-shaped profile, bladed air outlet and slim depth. Elegance has substance though as they're one of the most robust and secure units available. Highly energy efficient with on/off heater switch (0.4kW – 0.95kW), our in-house testing showed at maximum settings, these have a dry time that matched the popular Warner Howard Airforce. We would recommend these for low traffic (less than 100 uses a day) locations to give years of service such as small offices, schools (primary and secondary), pubs/bars, hotels, restaurants and limited space washrooms. Installation causes no problems for our fitters.”
A stunning elegant design
When the washroom has a touch of class about it, it says a lot about a location. The smooth, beautifully created stainless-steel cover of the EcoWave DFEW01 and DFEW02 complements the most luxurious of decoration.
Sleek and slender
The amount of space available in a washroom can restrict product choices. At just 100mm depth it takes up hardly any space. This reduces the chances of bumping into it, or other people, in confined spaces. It also looks great as it doesn’t protrude too far from the wall. The sloped nature of the cover minimises the chances of someone leaving objects on top of it.
Good for the planet and your bank account
If low running costs and being environmentally friendly are important factors to you, then this exceeds those requirements. Being able to run this unit at just 400W will keep energy bills so low you won’t even notice it on your electricity bills. Even with the heater element switched on during colder days, the energy produced is still fantastically low.
A satisfying drying experience
The last thing you want is for a hand dryer not to do its job right. A wide bladed air outlet strips moisture off both hands in seconds. This is complemented with a low, tolerable noise level from the motor and airflow.
Resilient, tough and vandal resistant
If you worry about equipment in your washroom getting damaged or tampered with, this will quash any concerns. The back plate is made of solid steel and the thick robust cover is securely fastened by 4 anti-vandal screws.
Purified clean air protects the motor
A filter is included, which rids the air taken into the unit of dust and dirt. It cleans the air being blown over the hands and protects the motor of debris, preserving its life, giving years of service.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
|Dry Time||10 - 15 Seconds|
|Recommended Daily Uses||100 (Low Traffic)|
|Quiet Mark Approved||No|
|Motor Type||Brushed Motor|
|Expected Motor Life||400 hours|
|Motor Speed||22,000 RPM|
|Air Speed||179 MPH|
|Electrical Supply Voltage||220 - 240 V|
|Electrical Supply Frequency||50 / 60 Hz|
|Rated Power||0.4 - 0.95 kW|
|Energy Per Dry||1.67 - 2.64 Wh|
|Heater Element Power||0.55 kW|
|As Standard||2 Years|
|Type||Parts and Labour|
|Extended / Enhanced Available||Yes|
|Finishes Available||White, Brushed|
|Cover Material||Stainless steel|
|Notable Extras||Filter, 10cm depth|
|Net Weight||4.5 Kg|
|Packaging Height||373 mm|
|Packaging Width||308 mm|
|Packaging Depth||128 mm|
|Packed Weight||5.5 Kg|
|Certificates||CE, ROHS, GS|
The install and user manual should provide guidelines for specific products, however the following can be used as a guide also:
For "hands under":
From the air outlet to the floor:
For "hands in":
Align the top of the hand dryer above the floor to:
Please note that blade hand dryers require different levels of clearance space in order to access the drip tray or other serviceable parts. Please consult the manufacturers' instructions.
We pride ourselves on strictly testing the majority of the hand dryers we sell to make sure you are getting true performance information. Where we haven't yet tested we will use the manufacturers guide.
In our experience only a handful of hand dryers can dry the hands satisfactory in around 10-12 seconds, and certainly none under 10 seconds.