This product can be used as a stand-alone item but also forms part of the Dryflow Tri-Tap series IFSUCM093A-ANON which includes an over-the-sink hand dryer and water sensor tap. The full set can be purchased in one go by clicking here. There’s also a 2-product series available in this range as a deck-mounted option. The Dryflow Tri-Tap Automatic Soap Dispenser is both elegant and efficient. Its solid brass construction finished in eye-catching polished chrome is suitable to dispense soaps with 100-3500 cP viscosity and with neutral pH. A generously sized tank of 1.5L means that reservoirs will last a long time between refills. An anti-drip valve is provided as a standard which prevents mess and unnecessary waste. It is possible to adjust the amount of soap delivered at each application to also minimise waste. The 4 settings allow a shot of soap at either 0.5ml, 1ml, 1.5ml or 2ml.
This product is available in a DECK mounted Bi-Tap or WALL mounted Tri-Tap option.
When combined with the Dryflow Tri-Tap hand dryer and water sensor tap, every part of the hand washing experience can be made effortlessly over the sink. A high-quality, robust product that we would recommend for mid to high traffic areas (300-500 uses per day)
The unit comes equipped with the ability to choose the power supply with it using either battery operation or via the mains. The sensor operation allows everything to be touch free, preventing cross contamination and a much more efficient use of soap.
Dryflow Tri-Tap Automatic Soap Dispenser, wall mounted, infra-red brass tap with polished chrome finish. Battery operated using 4 X 1.5 AA batteries or mains supplied using the included 220-240V power adapter. Liquid soap with 100-3500 cP viscosity and with neutral pH is recommended. A 1.5L tank can be adjusted so that a shot of soap can be either 0.5ml, 1ml, 1.5ml or 2ml. A none drip valve is included as standard. The full Dryflow Tri-Tap series includes a wall mounted hand dryer, water sensor tap and automatic soap dispenser for a complete over the sink wash and dry experience.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
If stated on our website under the product “suitable for outdoor use” then yes.
Warranty typically starts from dispatch date of dispenser and last 6 months. Some dispensers may vary.
Is this an automatic unit and there is no power? The batteries may be flat and require replacing. If you have more than one unit, you will be able to test this by taking the batteries from a working unit and fitting them into the unit without power.
If the unit is not pumping out gel, remove the gel from unit, clean the holding tank and flush warm water through the pump.
If the tips above have not resolved the issue, give us a call and we’ll be happy to help.
If users are aggressive with the product or if it’s damaged by impact, this is not covered under the warranty. Unfortunately, we would not be able to replace. However, we do want to help. Please call and we can do our best to give you some options to help your situation.