Very resistant to corrosion, with great capacity and in a prestige finish, B-2111 vertical soap dispenser is ideal for high traffic commercial washrooms with a contemporary décor. Quite straightforward to maintain, one can check the soap level on its acrylic indicator window and refill its 1.2 litre reservoir capacity by opening the hinged top lid, which requires a special key (furnished). It is also simple to use: the black push button of B-2111 dispenses up to 0.66ml each time. And since only one hand and less than 22.2N of force are needed to operate the valve, this soap dispenser is suitable for accessible washrooms.
The container and the concealed back plate are made of stainless steel in satin finish, while plastic composes the other parts. To extend the service life of this surface-mounted dispenser, the manufacturer advises to use chloride-free and pH-neutral liquid soap. Please, note that B-2111 is not designed to support alcohol-based or iodine-based content. We encourage you to follow the maintenance guidelines you may find below (do not clean with abrasive detergents).
Here at Intelligent Hand Dryers UK we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 28-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
If stated on our website under the product “suitable for outdoor use” then yes.
Warranty typically starts from dispatch date of dispenser and last 6 months. Some dispensers may vary.
No power to the unit? The batteries may be flat and require replacing. If you have more than one unit, you will be able to test this by taking the batteries from a working unit and fitting them into the unit without power.
If the unit is not pumping out gel, remove the gel from unit, clean the holding tank and flush warm water through the pump.
If the tips above have not resolved the issue, give us a call and we’ll be happy to help.
If users are aggressive with the product or if it’s damaged by impact, this is not covered under the warranty. Unfortunately, we would not be able to replace. However, we do want to help. Please call and we can do our best to give you some options to help your situation.