This Bobrick foaming soap dispenser has a sensor-activated valve that reacts approximately one second after the users place their hands in the 60mm range. Since no contact is required from the user, B-2013 foam dispenser improves hygiene in commercial and public restrooms, as well as accessibility. It accepts foam soap, concentrated foam soap or cartridge foam soap, with viscosities ranging from 0-150cP. A clear window indicates the soap level of the reusable 800ml container. A special key is provided for top refilling.
The sensor should be at least 200mm from the counter (or floor); it will adjust to the surrounding conditions. One cannot control its settings, so the manufacturer recommends to check if it is working properly before drilling.
Its satin finished stainless steel is a durable material, which will last for a long time if the cleaning tips below are followed. Wash the reservoir conscientiously every time; never with abrasive solutions.
A blue LED indicates that the unit is in use. If it flashes, it means low battery. The mechanism works with four alkaline 1.5V type-AA cell batteries; beware that they are not furnished in the package. Do not immerse or put this dispenser under running water.
Gamco, a Bobrick division, markets this product with the code G-950FA.
Here at Intelligent Hand Dryers UK we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email email@example.com
We offer a 28-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
If stated on our website under the product “suitable for outdoor use” then yes.
No power to the unit? The batteries may be flat and require replacing. If you have more than one unit, you will be able to test this by taking the batteries from a working unit and fitting them into the unit without power.
If the unit is not pumping out gel, remove the gel from unit, clean the holding tank and flush warm water through the pump.
If the tips above have not resolved the issue, give us a call and we’ll be happy to help.
If users are aggressive with the product or if it’s damaged by impact, this is not covered under the warranty. Unfortunately, we would not be able to replace. However, we do want to help. Please call and we can do our best to give you some options to help your situation.