The Prestige Vanity Top Soap Dispensers have an elegant and prestigious design and are recommended for washroom basin tops, kitchen counter tops, bath sides and hair salon tops. These offer a discrete alternative to wall mounted dispensers. Minimum space is required, yet the 1000ml container is suitable for high use washrooms. The spout can be positioned to hang into wash basins and avoid soap residue on surfaces with a drip free pump action. The spout will not rotate once installed. Hard wearing and corrosion resistant materials ensure the product has a long-life. Two spout lengths are available: 100mm and 127mm. You are viewing the 100mm spout length.
AISI 304 polished chrome spout with brass housing ﬁts above counter top, the 1000ml capacity polypropylene container is concealed under the counter top. The dispenser requires a minimum 25mm hole drilled through surface. Press-down, spring-loaded pump mechanism delivers single 2ml shot of liquid soap. Reﬁll access is through a special key that allows the piston and spout to be removed enabling easy, above the counter ﬁlling.
Here at Intelligent Facility Solutions Ltd we are confident that our products will exceed expectations, however, if you feel you have a valid reason to return the hand dryer(s) or other products please contact us in the first instance to receive a unique returns number. Either call 0114 3540047 or email firstname.lastname@example.org
We offer a 90-day period from purchase where you have the option to return the goods
Please review our full returns policy here
Need installation? No problem! We have our own UK network of approved installers that can normally install anywhere in the country within 10 days. Please contact one of the team here or choose "Ask a question" at the bottom of these tabs now. Also view here for more information.
We provide flexible rental plans and nationwide installation on all our dryers and some washroom products – for more information view here
If stated on our website under the product “suitable for outdoor use” then yes.
Warranty typically starts from dispatch date of dispenser and last 6 months. Some dispensers may vary.
No power to the unit? The batteries may be flat and require replacing. If you have more than one unit, you will be able to test this by taking the batteries from a working unit and fitting them into the unit without power.
If the unit is not pumping out gel, remove the gel from unit, clean the holding tank and flush warm water through the pump.
If the tips above have not resolved the issue, give us a call and we’ll be happy to help.
If users are aggressive with the product or if it’s damaged by impact, this is not covered under the warranty. Unfortunately, we would not be able to replace. However, we do want to help. Please call and we can do our best to give you some options to help your situation.