5 Key Questions Answered about Industrial Hand Soap
Liquid hand soaps for household and commercial areas are usually not enough to clean hands thoroughly at industrial locations such as factories, labs, workshops and garages. These workers might need heavy duty hand cleaners that are able to remove sticky substances or grime in a quick way but without harming the skin. To help you identify industrial soap and its basic types in the market, we have compiled the main concepts.
What does industrial soap clean?
Every type of heavy duty hand cleaner is specialised for a particular family of substances. For example, the market offers industrial soap for at least the following:
- Oil, grease
- Paint, ink
- Glues, other adhesives
- Resins, tar
- Soil, carbon
The more specific the product is, the more chances there are it is effective. General industrial hand soaps might have more efficacy than liquid soaps, but only to some extent.
How does industrial soap clean?
Hand cleaners for mechanics and labourers commonly have the following components:
- Scrubbing particles like plastic beads, pumice or crushed walnut shells that brush the skin to help to remove the dirt. Note that some scrubbers are not biodegradable or could eventually block the water pipes.
- A degreaser that aids to breakdown the viscosity. Sometimes this element is solvent and abrading, therefore harsh on skin. There are also soaps that include solvent free or non-abrading ingredients like citrus fruits.
- Since the scrubbing agent and degreaser might eliminate the natural oil of the skin, hand cleaners often contain lotion, conditioner or extracts to sooth and moisturise, such as aloe vera or vitamin E.
- A fragrance is often included for a better aroma.
We would encourage you to check the formulas of the hand cleaners in order to find the least harmful product for both the skin and the environment.
How is industrial soap dispensed?
Like other hygiene products, hand cleaners can come as a 2 in 1 solution or only as a refill. The first is frequently a bottle of soap that includes a plastic dispensing system. The second would be just the pouch or bottle to place onto a permanent, long-lasting dispenser.
An all in one mechanism like a small paste tube could be sufficient for one worker that only requires a couple of shots per day, although it will be a little slippery and/or messy to use. For peace of mind and for locations with a lot of daily uses, the ideal will be a steady high capacity bottle with integrated spout or a wall mounted dispenser suitable for industrial soap. Such products have a special pump to dispense thicker soaps and with a bigger output than common liquid soap dispensers. Whereas a regular dispenser pours 1ml or less per action, a heavy duty hand cleaner dispenser serves 3ml of paste styled soap.
It may also be relevant to see how the worker would interact with the dispenser. For instance, an elbow or forearm operated dispenser with lever would avoid cross contamination between colleagues with dirty hands as well as would demand less work of the cleaning staff.
How do you apply industrial soap?
To apply industrial hand cleaner, different procedures should be followed depending on the soap form: powder, flake, bar or crème styled. Unlike the other three, the latter does not require water to lather. In the main, you rub your hands together and rinse with water or wet wipes (when there is no tap near). To dry the hands, use an electric hand dryer or, if it is a powerless or a silent room, paper towels.
When would you not use industrial soap?
Approximately 6,000 new cases of work-related skin disease appear in Great Britain every year. The constant use of water, high temperatures, cleaning materials or some chemicals can cause occupational dermatitis or lead to allergy development.
Before deciding on using potentially harmful substances at the workplace, one must analyse if the material should be handled with hands in the first place. There may be an alternative. When this cannot be eluded, check the labelling of the product to see whether it might be damaging.
The Health and Safety Executive recommends workers are educated on washing, drying and moisturising their hands or, when necessary, equipment like suitable protective gloves (non-latex if possible) is provided. In any case, employees should keep an eye on their hands’ health. Spotting an early symptom can allow a proper response and cure on time.
At IFS, we aim at composing an extensive range of washroom fittings in order to promote inclusion and accessories for different types of commercial areas. As a result, we supply products for users with disabilities (bathroom grab rails, shower seats or sensor taps), appliances for hospitality and sport centres (hair dryers) or varied types of dispensers, from heavy duty hand cleaners to medical soap dispensers. Should you have any questions or requests, do not hesitate to contact our team.